Scorcher GT Module

aFe – POWER SCORCHER GT Module

A simple 30-minute install will give you a huge increase in power. The SCORCHER GT Module includes a high-quality case & wire harness with factory style connectors for an easy plug & play installation. The case is equipped with an ON/OFF button and a blue L.E.D. light to indicate when the module is powered up. This performance module connects to and alters Manifold Air Pressure (MAP) and Intake Air Temperature (IAT) sensor signals. It improves vehicle performance and throttle response.

Direct Plug & Play Power:

This quick and easy plug & play SCORCHER GT module adds significant power by altering MAP and IAT sensor signals to increase performance and improve vehicle efficiency and throttle response.

High Quality Case & Wire Harness:

aFe – SCORCHER GT modules use high-quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which require no modification to your factory harness. These factory style connectors plug directly into the stock wiring harness connectors and sensors.

ON/OFF Button on the case:

This module comes with a built-in blue L.E.D. light to show the module is powered up and functioning correctly. It can be turned on and off easily thanks to the button on the case. The blue L.E.D. light will be on when the module is powered up.

High Precision and Quality:

SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe – POWER performance products.

Recommendations:

aFe – POWER does not recommend using this device in conjunction with any other tuners or modules.

Emissions Disclaimer:

This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Product Details

• Dyno tested and produced significant power increases of +12 HP / +21 lbs. x ft. torque at 3,101 RPM on the 2014 RAM 1500 Hemi 5.7L engine
• Quick and easy plug & play installation without any modifications
• Around 30 minute installation
• Alters MAP and IAT signals to improve vehicle performance, efficiency and throttle response
• ON/OFF button on the case
• Leaves no trace on ECU (No Footprint)
• High quality case & wire harness w/ OEM style connectors
• High reliability, 100% of units tested
• Compatible with other aFe – POWER performance products

• Installation instructions

Fitment

aFe’s Warranty

For information on aFe’s warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.